English
INTAR Nut Driver
Holder Installation
Guide
Basic installation guide for 2 slot holder
(please read before installing)
![](https://intar.ee/wp-content/uploads/2022/08/INTR-NDH-SL2-1.png)
Tools required:
- Tape Measure
- Power Drill
- #2 Phillips Screwdriver
- Drill Bit
Box contents:
![](https://intar.ee/wp-content/uploads/2022/08/INTR-NDH-SL2-2.png)
- CAUTION:
Risk of falling objects. Securely install the Intar Drill Holder to the wall per the mounting instructions. Failure to do so could result in minor or moderate injury.
Holder Installation
1
Check that there is enough space for installation of the holder.
![](https://intar.ee/wp-content/uploads/2022/08/INTR-NDH-SL2-3.png)
2
Use the tape measure to measure hole positions and mark them Use the power drill to make holes for the anchors in the marked position.
![](https://intar.ee/wp-content/uploads/2022/08/INTR-NDH-SL2-4.png)
3
Insert the anchors into the drilled holes.
![](https://intar.ee/wp-content/uploads/2022/06/INTR-DH-SL2-5.png)
4
Place the Intar Drill Holder on the wall over the drilled holes and fasten it in place with screws.
![](https://intar.ee/wp-content/uploads/2022/08/INTR-NDH-SL2-6.png)
5
Place your cordless nut driver in the holder.
![](https://intar.ee/wp-content/uploads/2022/08/INTR-NDH-SL2-7.png)