English
INTAR Garden tool
Holder Installation Guide
Basic installation guide for garden tool holder
(please read before installing)
Tools required:
- Tape Measure
- Power Drill
- #2 Phillips Screwdriver
- Drill Bit
Box contents:
- CAUTION:
Risk of falling objects. Securely install the Intar Drill Holder to the wall per the mounting instructions. Failure to do so could result in minor or moderate injury.
Holder Installation
1
Check that there is enough space for installation of the holder.
2
Use the tape measure to measure hole positions and mark them. Use the power drill to make holes for the anchors in the marked position.
3
Insert the anchors into the drilled holes.
4
Place the included screws into top anchors and fasten them so the screw
head will stick out.
5
Place the Holder on the wall over the screws and tighten the
screws through holder’s square holes.
6
Place the included screws into bottom holes and fasten them.
7
Place your garden tool in the holder.
