English
INTAR Drill Holder
Installation Guide
Basic installation for 2 slot holder
(please read before installing)
Tools required:
- Tape Measure
- Power Drill
- #2 Phillips Screwdriver
- Drill Bit
Box contents:
- CAUTION:
Risk of falling objects. Securely install the Intar Drill Holder to the wall per the mounting instructions. Failure to do so could result in minor or moderate injury.
Holder Installation
1
Check that there is enough space for installation of the holder.
2
Use the tape measure to measure hole positions and mark them
Use the power drill to make holes for the anchors in the marked position.
3
Insert the anchors into the drilled holes.
4
Place the Intar Drill Holder on the wall over the drilled holes
and fasten it in place with screws.
5
Place your cordless drills in the holder on the wall and charger on top.
