Manuals

English

INTAR Circular Saw
Holder Installation
Guide

Basic installation guide for circular saw holder
(please read before installing)

Tools required:

  • Tape Measure
  • Power Drill
  • #2 Phillips Screwdriver
  • Drill Bit

Box contents:

  • CAUTION:

Risk of falling objects. Securely install the Intar Drill Holder to the wall per the mounting instructions. Failure to do so could result in minor or moderate injury.

Holder Installation

1

Check that there is enough space for installation of the holder

2

Use the tape measure to measure hole positions and mark them
Use the power drill to make holes for the anchors in the marked position.

3

Insert the anchors into the drilled holes.

4

Place the included screws into bottom anchors and fasten them so the screw
head will stick out.

5

Place the Intar Saw Holder on the wall over the screws and tighten the
screws through holder’s square holes.

6

Place screws into the top holes and fasten the holder in place.

7

Place your circular saw in the holder.

Back