Manuals

English

INTAR Drill Holder
Installation Guide

Basic installation for 2 slot holder (please read before installing)

Tools required:

  • Tape Measure
  • Power Drill
  • #2 Phillips Screwdriver
  • Drill Bit

Box contents:

  • CAUTION:
Risk of falling objects. Securely install the Intar Drill Holder to the wall per the mounting instructions. Failure to do so could result in minor or moderate injury.

Holder Installation

1

Check that there is enough space for installation of the holder.

2

Use the tape measure to measure hole positions and mark them Use the power drill to make holes for the anchors in the marked position.

3

Insert the anchors into the drilled holes.

4

Place the Intar Drill Holder on the wall over the drilled holes and fasten it in place with screws.

5

Place your cordless drills in the holder on the wall and charger on top.
Back